Aluminium profiles

DHAZE Aluminium profiles

Available finishes and closing systems
Profiles for frames
Profiles for freestanding frames
Profiles with thermal breaks
H & clip profiles
Accessories and examples

AVAILABLE FINISHES AND CLOSING SYSTEMS

Our profiles are available in all different lengths up to 7 metres and are available in the following finishes:

Natural aluminium
White lacquer aluminium (RAL 9010)
RAL lacquer aluminium – choice of colour available on demand

Our profiles are bearing between supports over different lengths – beyond the mentioned lengths you need an extra bearing structure or intermediate panels. Do not hesitate to send us price requests for specific projects such as canopies, vaults and veranda rooftops.
For maintaining steel sheets, our profiles can come with tightening bonnets or EPDM rubber joints.

Tightening bonnet systems:

Our bonnet system permits:

Easy assembly
Easy disassembly if you wish to make modifications to your structure
Excellent steel sheet bearing
Little or no thermal bridge

EPDM joint system

An EPDM double-lip joint clasps each side of the steel sheets thereby ensuring that the structure is watertight.

Back to menu

PROFILES FOR FRAMES

« Rafter » T profile for frames

T profiles are a solution of choice for projects where there is an existing frame. They also have a stretching capacity between rests of 1.6m

Back to menu

PROFILES FOR FREESTANDING FRAMES

Tub 60 profiles, freestanding over one stretch

Tub 60 profiles are freestanding over a length of 3.5m between rests which allows you to build your projects without requiring the use of a frame.

Tub 121 profiles: bearing for 4.5m between rests

Tub 121 profiles are freestanding over a length of 4.5m between rests, allowing you to build frameless structures

Back to menu

PROFILES WITH THERMAL BREAKS

Spine profiles with thermal breaks: bearing over 4.2m between rests

Profiles with breaks are freestanding over a length of 4.2m and allow optimal thermal insulation.

Back to menu

H & CLIP PROFILES

H profiles provide a less expensive solution and allow you to build a rooftop in 16mm thickness. Clip profiles allow you to build your structure with speed.